Top 10 Vava Replacement Adhesive – Cell Phone Automobile Cradles

As an Amazon Associate I earn from qualifying purchases.

1. volport

#ad

10 Pack 3M Sticky Adhesive Replacement Compatible with Socket Mount Base, volport VHB Sticker Pads for Car Magnetic Phone Holder and 2pcs 1.38 Inches Double Sided Tape for Collapsible Grip & Stand

#ad
volport #ad - What you get: volport 8 pack small 3m phone sticky adhesive gel, and 2 pack alcohol pads. Easy to use: you need to remove the used 3m tape tab of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then attach a new 3M adhesive sticky circles on the back of grip mount and press firmly for 5 to 10 minutes for better connecting to the car mount base.

Just remount your expanding stand with this vhb 3M double sided adhesive pads. Best sticker replacement pads for sticking your phone adhesive tie mount. No-risk purchase! unconditional 30-day money-back guarantee. Super strong 3m sticky adhesives strips: 2 pack more larger sticky adhesive replacement parts compatible with phone collapsible grip. For best result, if you find the magnet phone holder adhesion hard to peel, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3M adhesive stickers backers.

As for the 3m adhesive tapes dots, please try to press it back and peel again. Please wait 24 HOURS to use after stuck. This long-lasting adhesive replacement kit is a good choice to re-stick your phone wall mount and magnetic phone mount. Alcohol pads provided: clean the chosen area where you'd like to place your phone with alcohol pads. Cell phone holder adhesive backing: 8 pack small vhb 3m sticky adhesive glue exclusively designed for finger holder, plastic mount, grip holder back and various magnetic cell phone car phone mount base.
Brandvolport #ad
ManufacturerVOLPORT #ad
Height0.02 Inches
Length0.9 Inches
Weight0.03 Pounds
Width0.9 Inches
Part NumberVOLPORT-VM0028US
Model4351481580

2. AZXYI

#ad

Double Sided Stickers Adhesive for Suction Cup Dashboard Disc, Very High Bond Sticky Adhesive for Dashboard Pad Mounting Disk, Dash Cam, Windshield, GPS, AZXYI 6pcs Car Sticky Adhesive Replacement

#ad
AZXYI #ad - 6 pcs alcohol prep pads - to maximize adhesive contact, please clean the adhesive surface with alcohol pad before use and let it dry, free of contaminates. Note: the package not include the mounting disk. Press down repeatedly for 5-10 minutes to increase the contact of the adhesive with the substrate. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.

Cut into any size you need & designed for suction items - you can cut pads into smaller pieces if need. And wait at least 24 hours to use for the better adhesion. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other white side film and stick to your car dashboard. Please wait 24 HOURS to use. Very high bond & easy to removethese high-strength, bonding almost instantly with no drying time. Easy to install - provided rounded rectangle raised label to easily peel off the white release film of the adhesive pads.

Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, camera mount, ETC, EZ Pass/I-Pass/SunPass holder, wireless charger base, dash camera mount holder etc on the market. It also resists heat and moisture, and protects adhesive surfaces against scratches, double-sided adhesive pads let you quickly and easily create a long-lasting bond, easy peels off without leaving any sticky residue behind.6pcs clear adhesives replacement - azxyi 6 pcs circle heat resistant clear sticky adhesive padsDiameter: 70mm, 2.
BrandAZXYI #ad
ManufacturerAZXYI #ad
Height0.04 Inches
Length2.76 Inches
Weight0.07 Pounds
Width2.76 Inches
Part NumberAZXYI-6DW
ModelAZXYI-6DW

3. AZXYI

#ad

1.4 inches Double Sided Sticker Tapes for Phone Collapsible Grip & Stand Base, AZXYI 9 Pack Adhesive Replacement for Socket Base, Very High Bond Sticky Adhesive

#ad
AZXYI #ad - And wait at least 24 hours to use after stuck. It resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind. 6 pcs alcohol prep padsto maximize adhesive contact, please clean the adhesive surface with alcohol pad before use and let it dry, free of contaminates.

Durabilitythese double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. Very high bondthese high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various substrates/surfaces, stable even in bumpy roads and actually builds strength over time.

Genuine adhesive padsthe best sticky tapes for phone collapsible grip we provide is with high temperature resistance and stronger stickiness features. 9pcs sticky adhesives replacementazxyi offers 9 Pcs adhesive padsDiameter: 1. 4 inches compatible with socket base, double-side pressure sensitive for attaching socket back to your cellphone.
BrandAZXYI #ad
ManufacturerAZXYI #ad
Height0.03 Inches
Length1.38 Inches
Weight0.02 Pounds
Width1.38 Inches
Part NumberAZXYI-9A
ModelAZXYI-9A

4. AZXYI

#ad

AZXYI 6 Pack Socket Sticky Adhesive Replacement Kit, Double-Sided Stickers for Collapsible Grips Socket Base, Very High Bond Sticky Adhesive

#ad
AZXYI #ad - Durabilitythese double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. Strong sticky adhesive azxyi double-sided bonding adhesives successfully are compatible with collapsible phone grip socket for permanent and repositionable applications.

Compatible with socket baseazxyi offers 6 pcs round sticky adhesive padsDiameter: 1. 4 inches with pressure-sensitive adhesive on two sides for attaching socket base to your smartphone. The adhesion of liquid silica gel surface can be improved by the silica gel adhesive. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind. Very high bondthese high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various substrates/surfaces, stable even in bumpy roads and actually builds strength over time.

Note: the liquid silicone phone case can not be directly bonded with double-sided pressure-sensitive adhesive. 6 pcs alcohol prep padsto maximize adhesive contact, please clean the adhesive surface with alcohol pad before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck.
BrandAZXYI #ad
ManufacturerAZXYI #ad
Height0.03 Inches
Length1.38 Inches
Width1.38 Inches
Part NumberCQ-2KW1-WCSE

5. PKYAA

#ad

Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit, PKYAA 3pcs 2.76"70mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam

#ad
PKYAA #ad - You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. Please do not hesitate to contact us and we will provide you our best after-sale service. High temperature resistance sticky adhesivethese stickers have high temperature120℃+ resistance performance.

Extra strong both side clear adhesion pads's stickiness is 40% stronger than ordinary sticky adhesive. Easy to removethese high-strength, bonding almost instantly with no drying time. 3pcs clear adhesives replacementpkyaa offers 3pcs round clear sticky adhesive padsDiameter: 2. 76"/70mm, for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. It also resists heat and moisture, double-sided adhesive pads let you quickly and easily create a long-lasting bond, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.

Please wait 24 HOURS to use. Easy to fix your car phone socket base, truck, heavy duty dashboard mount base, you can stable and secure driving uber, vehicle in bumpy roads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Press down repeatedly to increase the contact of the adhesive with the substrate.
BrandPKYAA #ad
ManufacturerPKYAA #ad
Height2.76 Inches
Length2.76 Inches
Weight0.03 Pounds
Width0.04 Inches
Part NumberPKYAA-3DPS
ModelPKYAA-3DPS

6. PKYAA

#ad

8 Pack Sticky Adhesive Compatible with Socket Mount Base, 4 Pack Sticker Pads for Collapsible Grip & Stand Base, PKYAA Double-Sided Replacement Tape for Car Magnetic Phone Holder

#ad
PKYAA #ad - 8 pcs 091" very high bond adhesive compatible with socket mounts base the 23mm091" double side sticky adhesive can be used on the bottom of Socket car mounts, magnetic car mounts, instrument panel cam holders, gps holders and vent mount to maintain stability even on rough roads.

Durabilitythese double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. 4 pcs 1. 38" very high bond adhesive compatible with socket basepkyaa offers 4Pcs Very High Bond double side sticky adhesive compatible with Socket Base, the adhesive is 35mm1. 38" and fit out-stand base perfectly. 4 pcs alcohol prep padswipe down the adhesion surface with alcohol prep pads when applying adhesive pads. Pkyaa very high bond sticky adhesive replacement superior performancepkyAA offer original Very High Bond super-adhesive is 40% stronger than ordinary black sticky, high temperature resistant and low temperature resistant.

Pkyaa sticky adhesive is extremely compatible with the base and back. Ensure that the collapsible grip mount has a clean surface to adhere to so that it sticks properly. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
BrandPKYAA #ad
ManufacturerPKYAA #ad
Height0.03 Inches
Length0.91 Inches
Weight0.02 Pounds
Width0.91 Inches
Part NumberPKYAA-3M002
ModelPKYAA-3M002

7. EASTSHINE

#ad

Stylish Universal Metal Disc Replacement Sticker for iPhone GPS Magnet Holder Cradle Stand 5 Round, Mount Metal Plate with 3M Adhesive 5 Pack for Magnetic Cell Phone Car Mount

#ad
EASTSHINE #ad - Perfect size magic plate: ultra-thin 05 mm in thickness to minimize bulkiness for your Smart Phone. What you get: 5 packs mount metal disc replacement, 7 x 24 Hours friendly Customer Service, 30 Days Free Refund / Replacement. Mount metal plate: great to work with all magnetic phone car holders for dash, dashboard, cd slot, vent, windshield or window.

Note eastshine h2 metal discs / disk do not have Magnets, Vents, just Replacements Plates for Magnetic Cars Cradle-less. Universal metal plate: the magnetic plate easily attach your device smartphones, navigation device onto magnetic Car Smartphone Mount / Stand / Holder / Magicmount of Dashboard, Tablets, CD Slot or Windows.33. Genuine 3m adhesive backing provide Strong Stickiness to Attach on / Stick inside your Device / Cell Phone Case Safely.

Widely compatible with iphone 11 / s9 plus / s10e / s8 plus / 8 plus / 6s plus 6 / 6 plus / s10 plus / note 9 / 7 plus / lg / 11 pro max / xs / 7 / xr / samsung galaxy s10 / note 10+ / X / note 8 / XS Max / S8 / 6s / 11 Pro / s7 edge / note 10 / S7 / S9 / 8 / Moto and all Mobile Phones.5 round circle Standard 35mm / 1. 38 inch size can be suitable for both Smaller and Larger Devices / Cases. Durable & stable magnet sticker: rust-free iron material ensure strong Durability and Long Lifespan. 2.
BrandEASTSHINE #ad
ManufacturerEASTSHINE #ad
Height0.1 Inches
Length1.4 Inches
Weight0.04 Pounds
Width1.4 Inches
Part NumberCar Phone Mount Metal Plate H2
ModelCar Phone Mount Metal Plate H2

8. volport

#ad

Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs, Pops Sticky Adhesive Replacement for Car Mount

#ad
volport #ad - Peel off the red backing film, then wait 24 HOURS to use after stuck, stick on the flat and clean surface you want, that's it. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have; 2. Note: 1. Adhesive pads for dash mount: 6pcs small 3m circles dots kit is designed for the base of expanding socket mount, wireless charger mount, magnetic dashboard car mount, dash cam mount, collapsible grip stand, cell phone finger ring holder, no problem in hot/heat/warmth summer in florida.

How to use 3m vhb adhesive pad: 1. 2. Do not stick adhesive on rugged, it may not stick well, texture silicone surface, clean flat and hard surface will be better. Compatible with iphone 11 pro max, xs max, google pixel. Tips for using 3m sticky adhesive: 1. If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again.

3. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base; 3. Last but the most important point, please WAIT 24 HOURS after stuck. 2pcs extra metal plates: extras tiny metal discs can be use inside of phone socket cap to work with magnetic car phone mount, xr; samsung galaxy fold, also can be pasted on cell phone or mobile phone case to works with magnetic car holder.
Brandvolport #ad
ManufacturerVOLPORT #ad
Height0.2 Inches
Length3.94 Inches
Width2.76 Inches

9. pop-tech

#ad

Pop-tech VHB 3M Sticker Pads for Phone Collapsible Grip & Stand Back, 9pcs 35mm Double Sided Tapes & 4pcs Alcohol Prep Pads, 9 Pack Pops Sticky Adhesive Replacement for Socket Mount Base

#ad
pop-tech #ad - Alcohol prep pads provided - the circular sticky-pad replacement kit comes with alcohol wipes to clean the surfaces before applying. What you get - pop-tech 9 pack 35mm 1. 38 inch replacement stickers remover for repositionable socket wallet+ and 4 pack alcohol prep pads. Enjoying the super strong circle replacement stickers for your socket adhesive perfectly.

No-risk purchase! unconditional 30-day money-back guarantee. If you plan to use the replacement adhesive circles over time you may need ultra alcohol prep pads for cleaning solution. Perfect replacement kits for socket users! High bond 3m adhesive pads - the best vhb sticky tapes for phone collapsible grip we provide is with high temperature resistance and stronger stickiness features. 24 hrs to use auxiliary 3m adhesive tapes after installation for best results. Our worry-free 18-month warranty guarantee and friendly customer service. Great replacement sticker refills for reapplying your socket. Easy to install - simply re-stick your socket bottom or readjust to mount on a security camera.

The multi pack of big adhesive replacement is a must-have to allow you to re-attach socket to phone cases for extending the life of your socket mount without having to buy a whole new socket. 9 pack pops sticky adhesive for socket base - plenty of sticker adhesives extra strong as backup is exclusively designed to reapply the socket mount. Peel off the removable gel adhesive backs from socket & clean the back of phone and socket with alcohol wipe before using the new adhesive, then peel off the replaceable 3m adhesive pads to stick the base of socket mount and press down repeatedly for 5- 10 minutes.
Brandpop-tech #ad
Manufacturerpop-tech #ad
Height0.02 Inches
Length1.38 Inches
Width1.38 Inches
Part NumberPKZ-01

10. volport

#ad

Sticky Adhesive Replacement for Dashboard Suction Cup Mount, 80mm 3.15" VOLPORT 4pcs 3M VHB Circle Double-Sided Extra Strong Adhesive Sticker Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders

#ad
volport #ad - Easy to use : this circle 2 sides adhesion tape replacement kit comes with alcohol packs to clean the surfaces before applying. Your satisfaction is our priority. 5. This 3m double face sticky adhesive dot is also waterproof. Genuine 3m heat resistant sticky adhesive disc replacement the high temperature resistance performance of these suction cup adhesive back for dash cam mount reaches 120°C+,even on a hot summer day in Texas, you can also use it safely, no more worries.

4. Just peel off the old adhesive gel from mount and clean the the surface with alcohol pad first, when the surface is dried, tear off the 3m adhesive film to stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, then wait 24 HOURS to use. We provide a one-year warranty and if you need any help with our product, please feel free to contact us and we will offer you our best after-sales service.

Designed for suction cup mount volport 3m round flat adhesive stickers fit for dashboard suction cup mount cradle, suction adhesive base, backup camera screen, tablet holder, rv, shower head, car phone mount, suction car clips, towel ring, shower caddy, soap dispenser, shower shelf, make your sucker stronger. Package includes : 4 x 3. 15 inch 80mm diameter3m heat proof double-stick adhesive backing, 4 x alcohol pad, 1 x user guide. Very high bond stickiness : the adherence of these circular adhesive stickies pads is 40% stronger than the ordinary glue on the market. 3.
Brandvolport #ad
Manufacturervolport #ad
Height0.39 Inches
Length3.94 Inches
Width3.54 Inches
Part NumberV-C1CC-N